Nylon vs. Teflon PTFE/FEP Machining
Comparison of Nylon and Teflon PTFE/FEP Property Values
| Extruded Nylon | Cast Nylon |
|---|
| 1.2 | 0.6 - .12 |
| 12,400 | 10,000 - 13,500 |
| 410,000 | 420,000 - 500,000 |
| 4.5 | 5 |
| -- | -- |
| Material |
|---|
| Water Absorption Rating |
| Tensile Strength |
| Flexural Modulus |
| Coefficient of Linear Thermal Expansion |
| Dielectric Strength |
| Unfilled | 35% Glass Filled | 24% Carbon Filled |
|---|
| < 0.01 | 0.02 | 0.05 |
| 3,900 | 2,100 | 1,900 |
| 72,000 | 190,000 | 160,000 |
| 7.5 | 6.4 | 6.0 |
| -- | -- | -- |
Material Properties
- Machinability
- Low coefficient of friction
- Enhanced bearing and wear grades available
- FDA compliant grades available
- Glass-filled grades available
- Excellent dielectric properties
- Inertness to most chemicals
- High heat and chemical resistance
- Very low coeffiecient of friction
- Excellent radiation resistance
- Zero moisture absorption
- Relatively insensitive to power frequency
- Machinability
Click here to submit a Request for Quote
Or call us today at 714.579.7700
